Filter
Top Products
45
THE CONTROL SYSTEM
Voltage Sensor (Figure 50)
Proprietary device designed to measure incoming
line voltage and distribute either 208 or 240 VAC
operation. The sensor is only included in ovens
operated in North and South America.
To replace a defective Voltage Sensor:
1. Ensure “Cool Down” process is completed (“Cool
Down” message will disappear upon completion)
and unplug the oven.
2.
Remove Right Side Panel.
3. Remove Electrical Plate Assembly for access to
Voltage Sensor Screw.
4. Disconnect wiring from Voltage Sensor (2 wires to
Wiring Harness and 2 wires to terminal block).
5. Replace defective Voltage Sensor with P/N
100783.
6. Reconnect wiring.
7. Reattach the Electrical Plate Assembly and
side panel.
NUMBER
P
ART PART NUMBER
56
Scr
e
w – Voltage Sensor 101688
57
E
lectrical P
late HHB-8134
58
V
oltage S
ensor 100783
59
G
r
ommet – Electrical Plate 100644
60
N
ut – Electrical Plate Ground 100903
61
Scr
ew – Electrical Plate (x2) 102911
: Replacing Voltage Sensor
61
60
59
58
57
56