Setting Global Properties for an Object Type
Chapter 5 Managing Object Properties 137
The Information box displays any error messages that occur after you apply changes.
To Set Global Properties for Virtual Private Networks
1
In the Device Configuration portion of the navigation tree, click Global Properties.
The Global Properties object-type selection screen is displayed, as shown in
Figure 46 on page 111.
2 Select Virtual Private Network and click OK.
The Virtual Private Network Properties screen is displayed, as shown in Figure 65:
Figure 65 Virtual Private Network Properties Screen (Global)
3 (optional) In Display Objects Containing, enter a string of characters to restrict the
Virtual Private Network List to the objects including this string in their name (you
can use wildcard characters).
4 (optional) In Virtual Private Network List, select specific objects for which you want
to set properties.
5 (optional) In Notifications, specify whether you want notifications to be sent when
threshold crossings are detected:
■ To send notifications to e-mail addresses, select E-mail.
■ To send notifications as traps to SNMP devices, select SNMP.
