A SERVICE OF

logo

Managing Interface Properties
Chapter 5 Managing Object Properties 149
3 In CIR, specify a value for the committed information rate (CIR), the transfer rate
at which a network transfers data under normal conditions.
4 In EIR, specify a value for the excess information rate (EIR), the transfer rate for
data in excess of the data transferred at the CIR.
5 In Notifications, specify the type, if any, of notifications that you want:
E-mail: Select the check box to send threshold-crossing e-mail notifications for
each device indicator.
SNMP: Select the check box to send threshold-crossing SNMP traps to the SNMP
managers.
6 In Other Properties, select Enable Polling to collect the device counters.
7 Click Apply Changes.
Managing VP Properties
You can set or modify the properties of an individual VP, as well as being able to set
properties globally.
To Modify Individual VP Properties
1 In the Network portion of the navigation tree, right-click the VP and choose
Properties.
The VP Properties screen is displayed, as shown in Figure 74:
Figure 74 VP Properties Screen
2 In Label, specify a new label to be displayed in the navigation tree.