Filter
Top Products
100
Measurement Functions 3M™ Dynatel™ Advanced Modular System 965AMS
DSL>DSL Loss>Operation
1. Press the blue DSL
key
to enter the DSL function.
Use the up and down arrow
keys to select DSL Loss.
Use a tone source at the
far end that is capable of
sending a known output
level such as a 965AMS
tester. Use 0dBm as the
output level or follow your
method of test.
2. Press
DSL Setup
to select
the type of service.
3. Use the up and down
arrow keys to select the
type of service that you are
measuring.
4. Press
OK
when nished.