Filter
Top Products
137
3M™ Dynatel™ Advanced Modular System 965AMS Measurement Functions
POTS
Tests available with the POTS key include Loss, Noise,
Longitudinal Balance, Load Coil Counter, Caller ID, Ringers,
Level Trace, Kick Test and Voice Band Spectrum Analyzer.
POTS>Loss
Use Loss to measure the loss from the far-end of a circuit to the
near-end using a precision tone between 200 Hz and 20kHz.
Note: You must use a device at the far end to generate the tone.
This could be the milliwatt number in the central ofce or a
965AMS set to the tone mode.
POTS>Loss>Hook-Up
RED
GRN
BLK
Ring (B)Ring (B)
Ground (Earth)
Ground (Earth)
Tip (A)
Tip (A)