Filter
Top Products
24
Voltage Termination
1. The Voltage Termination
option allows you to select
the input impedance of the
965AMS digital voltmeter
(in supported countries
only). The input impedance
of the internal 965AMS
voltmeter is normally
1Mohm. However, some
legacy systems use voltage
measurement systems
with input impedances of
100Kohms. This option
is provided to maintain
measurement compatibility
with those systems.
If 100Kohm termination is
selected, the 965AMS tester
will display ‘100K’ on the
voltage measurement.
Use this menu to change
the Voltage Termination.
Use the up and down arrow
keys to highlight Voltage
Termination. Press
Change
to continue or press
to quit without making
changes.
System Setup 3M™ Dynatel™ Advanced Modular System 965AMS