Filter
Top Products
79
3M™ Dynatel™ Advanced Modular System 965AMS Measurement Functions
RFL>Single-Pair, Single-Section Operation
6. The rst parameter is
the gauge. Use the Up
and Down arrow keys to
highlight the gauge of your
cable.
Press
Select
to choose the
cable length.
Special Requirement: Enter
the cable temperature or the
length, but not both. Only one
parameter can be entered.
There must be one unknown to
solve the calculation.
For this example, we will use
the cable temperature as the
known value and the length
will not be entered.
7. Press
Unknown Length
to
enter an unknown length
and move to the Temp
section.