Filter
Top Products
96
Measurement Functions 3M™ Dynatel™ Advanced Modular System 965AMS
RFL>Wet Pulp>Operation
4. The Wet Pulp test rst
makes a measurement with
the far-end open.
Press
Start
to start the test.
5. Strap the pair at the far end,
then press
Continue
.
Note: The “Opens Ratio” value
displayed on the screen is the
ratio of R1/(R2+R1) times
100. This value is used by
some companies as part of the
measurement. It is not needed
to calculate the distance to the
fault.
6. The test results are shown
in ohms.
Press
Dist.
to convert the
ohms to the distance to the
fault.