Filter
Top Products
122
Measurement Functions 3M™ Dynatel™ Advanced Modular System 965AMS
TDR>Single Trace Mode>Operation
3. This screen shows the end
of a pair at 205 feet.
4. Use the TDR Controls
section in this chapter to
see all of the parameters
that you can adjust.
5. The Auto TDR mode
automatically nds
potential faults and displays
an icon that represents
the type of fault. Press
Auto TDR
to use this
function.
6. This trace shows a resistive
fault at 219 feet.
7. The Auto TDR is not a live
trace, but you can use the
Gain, Cable length, Span
and Filter functions.
8. If you change the circuit
you must capture a new
trace. Press
Live TDR
then
press
Auto TDR
.
9. This trace shows an open at
322 feet.