Filter
Top Products
83
3M™ Dynatel™ Advanced Modular System 965AMS Measurement Functions
RFL>Single Pair, Multi-Section Operation
1. Use the Auto test
, or
the Ohmmeter
, to
determine the type of fault.
2. Press the blue key to
enter the RFL function.
Press
Select
until the up
and down arrow keys are in
the Fault section. Use the
up and down arrow keys
to select the type of fault
that you have. The options
include:
Tip Cross, Ring Cross, Wet
Pulp, T-G, R-G, Short
This example will show a
Ring-Ground fault.
Press
Select
to move to
the Pair section.