Filter
Top Products
46
Measurement Functions 3M™ Dynatel™ Advanced Modular System 965AMS
Toolbox>965AMS Results Manager>Connections
1. Turn on the 965AMS tester and allow the unit to boot up.
2. Connect the 965AMS tester to power.
3. Connect the 965AMS tester to the PC via the USB to 15-pin
cable.
Note: If the “Welcome to Found New Hardware Wizard”
window appears then select “No, not this time” when asked
about connecting to Windows Update.
4. Select “No” when prompted to Set Up a Partnership.