Filter
Top Products
112
Measurement Functions 3M™ Dynatel™ Advanced Modular System 965AMS
DSL>Resistance Balance>Operation
3. Press
Test
to start the
test.
DSL>Resistance Balance>Recommended Values
Service % Ohms Difference
POTS 3%
Wideband 1%
Parameter OK Marginal Not OK
Resistance Balance <1% 1%–5% >5%
DSL>Resistance Balance>Application Notes
The resistance balance test is used to identify a high resistance
open or a bad splice.
The test will also identify a loop that is resistively too long for
the selected autotest.