Filter
Top Products
196
Care & Maintenance 3M™ Dynatel™ Advanced Modular System 965AMS
Battery Holder
The plastic battery holder that comes with the unit uses six
“AA” alkaline batteries (alkaline batteries are not included).
Use alkaline batteries only when the NiMH battery pack is
discharged and the AC adapter is not available. Typical lifetime
of the alkaline battery pack is twenty hours of normal use (less if
you use the backlight frequently, use the optional /SA or /ADSL
features heavily, or work in very cold weather). The alkaline
battery pack is installed the same way as the NiMH battery pack.
Note: The battery holder has protection against accidental
charging of alkaline batteries.
Test Leads
The 965AMS tester comes with a Red/Black test lead pair, a
Blue/Yellow test lead pair, and a separate Green test lead. The
Red/Black and Green test leads are used for most measurements.
The Blue/Yellow lead pair is used with some TDR modes (not
in the 965AMS-B tester), and the Yellow lead is used with RFL.
The shorting “strap” that comes with the unit is used with RFL.
Keep the test leads clean and dry at all times to insure best
accuracy of the measurements. Use soap and water to clean them
if necessary.