Filter
Top Products
34
Measurement Functions 3M™ Dynatel™ Advanced Modular System 965AMS
Ohms Measurements>Voltage Compensation
The Voltage Compensation
feature compensates for
crossed battery on the line.
Use “compensated” for most
measurements.
Press
V Comp
to turn voltage
compensation off and on. The
screen displays “Compensated”
or “Not Compensated.”
Ohms Measurements>Soak Test
The Soak Test function can
determine if the source of a
resistive fault is caused by
moisture, corrosion or pure
resistance by applying a current
to the circuit and measuring a
change in resistance.
Press
Soak Test
to access the
Soak Test menu.
NOTE: The Soak Test function
will not work properly if there
is voltage on the line. Voltage
Compensation does not apply
to the Soak Test.