Filter
Top Products
77
3M™ Dynatel™ Advanced Modular System 965AMS Measurement Functions
RFL>Single-Pair, Single-Section Operation
1. Use the Auto test
, or
the Ohmmeter
, to
determine the type of fault.
2. Press the blue key to
enter the RFL function.
Press
Select
until the Fault
section is highlighted. Use
the up and down arrow keys
to select the type of fault
that you have. The options
include:
Tip Cross, Ring Cross, Wet
Pulp, T-G, R-G, Short
This example will show a
Ring-Ground fault.
Press
Select
to move to
the Pair section.