Filter
Top Products
191
3M™ Dynatel™ Advanced Modular System 965AMS Care & Maintenance
Care & Maintenance
System Modes
1. The 965AMS tester is a microcomputer-controlled device
that is very similar to a laptop computer. The tester will be
in one of 3 modes: Active, Standby, or Power Down.
2. Active Mode: Press the red
key to wake-up the
tester. It is ready to use. The amount of time the tester will
stay in the active mode without pushing a key is controlled
by the Power-Down Timeout setting. Your choices are 5, 10
and 15 minutes.
3. Standby Mode: When you nish using the tester, press the
red
key to go into the Standby Mode.
4. Power Down Mode: This mode uses a very small amount
of power. This mode is recommended for extended down
time such as overnight or weekends and vacations. To power
down the tester, press and hold the red
key for 10
seconds to go into Power Down Mode.
Note: The tester is still using battery in Standby Mode. To
preserve battery life it is recommended that you power down
the tester overnight.