Filter
Top Products
64 Chapter 7 Mixing and Exporting Your Project
To change the Mixer view:
m Click on the Single, Arrange, or All buttons at the top of the Mixer window.
 Single: Shows all channel strips in the signal path of the selected track.
 Arrange:
Shows channel strips that correspond to tracks used in the Arrange window
.
 All: Shows all channel strips in the project.
m The Audio, Inst, Aux, and other buttons to the right act as “filters.” You can click one or
more of them to refine the Mixer view.
These buttons limit the display to particular channel types, which can make your life
much easier if working with large numbers of channels.
The channel strip of the selected track (in the Arrange window) is outlined in green,
making it easy to identify.
To select a different track/channel:
m In the Mixer: Click the name at the bottom of the desired channel strip.
The corresponding Arrange track is selected.
m In the Arrange area: Click the track name in the track list.
The corresponding channel strip is selected in the Mixer.
Using the Channel Strip Controls
This section will teach you the basics of using channel strips. The various channel strip
types offer different functionality, as discussed in the Logic user manual.
Pan/Balance control
Level fader