Filter
Top Products
Things You Should Know
About Your Breadmaker
POLARIZED PLUG
This appliance has a polarized plug—one
blade is wider than the other. To reduce the
risk of electric shock, this plug will fit into a
polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse it. If it
still does not fit, contact a qualified
electrician. Do not attempt to defeat this
safety feature by modifying the plug in any
way.
TAMPER-RESISTANT SCREWS
This appliance is equipped with tamper-resistant
screws to prevent removal of the outer cover. To
reduce the risk of fire or electric shock, do not
attempt to remove the outer cover. There are no
user-serviceable parts inside. Repair should be
done only by authorized service personnel.
ELECTRICAL CORD
The cord length of this appliance was selected to
reduce safety hazards that may occur with a longer
cord. If more cord length is needed, an extension
cord with a polarized plug may be used. It should be
rated not less than 10 amperes, 120 Volts, and have
Underwriters Laboratories (U.L.) or Canadian
Standards Association (CSA) listing, depending on
the country. When using a longer cord, be sure it
does not drape over a working area or dangle where
it could be pulled on or tripped over. Handle cord
carefully for longer life; avoid jerking or straining it
at outlet and appliance connections.
Product may vary slightly from what is illustrated.
BEFORE FIRST USE
There’s nothing like the aroma of fresh-baked bread.
With the Black & Decker All-In-One Pro
™
Automatic
Breadmaker, you can have the old-fashioned
goodness of homemade bread with today’s
automatic convenience. That’s because the
All-In-One Pro
™
Breadmaker does the work for you.
Even if you’ve never made homemade bread before,
you’ll rise to the occasion with this
Breadmaker.
Please take a few minutes to read this Use & Care
Instruction/Cookbook and to find a place to keep it
handy for reference. Pay particular attention to the
safety instructions provided for your protection.
Review the product warranty and service statements
and fill out and mail in the owner registration form.
Carefully unpack the Breadmaker and remove
all packaging materials. To remove any dust that
may have accumulated during packing, wipe the
Baking Pan, Mixing Paddle, and outside surface of
the Breadmaker with a clean, damp cloth. Do not
use scouring pads or any abrasives on any part of
the Breadmaker.
3
Important Safeguards