Table 8 — Accessing Functions and Subfunctions
OPERATION
KEYPAD DISPLAY
EXPANSION
ENTRY RESPONSE
To access a function, press
RESET RESET SETPOINTS
subfunction no. and function
name key. Display shows sub-
function group.
To move to other elements,
scroll up or down using arrow
keys. NOTE: These
displays do not show if
control is not configured
for reset.
CRT1 x COOL RESET AT 20 MA
CRT2N x COOL RTEMP (NO RESET)
CRT2F x COOL RTEMP (FULL RESET)
CRT2D x COOL DEGREES RESET
When the last element in a
subfunction has been displayed,
the first element is repeated.
RESET RESET SETPOINTS
CRT1 x COOL RESET AT 20 MA
To move to next subfunction
it is not necessary to use
subfunction number. Press
function name key to ad-
vance display through all
subfunctions within a
function and then back
to the first.
DEMAND DEMAND LIMIT SETPOINTS
TIME
CURRENT TIME AND DAY OF
WEEK
SETPOINT UNIT SETPOINTS
To move to another function,
either depress function name
key for desired function
(display shows the first
subfunction),
X ALARMS THERE ARE n ALARMS
or
Access a specific sub-
STAGE
CAPACITY STAGING
INFORMATION
function by using the sub-
function number and the
function name key.
Table 9 — Keypad Directory
STATUS
SUBFUNCTION KEYPAD ENTRY DISPLAY COMMENT
1 AUTOMATIC DISPLAY
Refer to Automatic Display Operation/Default Display section on page 25.
2 ALARMS/ALERTS
X ALARMS Number of Tripped Alarms/Alerts
R S AL Reset all Alarms/Alerts
ALARM* X
}
Displays Tripped Alarms/Alerts
ALARM* X
ALARM* X
ALARM* X
ALARM* X
To toggle between inputs (Yes/No) Press: (no) or (yes)
3 MODES
X MODES Number of Modes in Effect
X MODE
}
Displays Mode in Effect
X MODE
X MODE
X MODE
27