Filter
Top Products
Chapter 2 Command Summary
HP 53131A/132A Command Summary
2-32 Programming Guide
Table 2-2. HP 53131A/132A SCPI Command Summary (Continued)
Keyword/Syntax Parameter Form Std/
New
Comments
:MEMory
:DELete
:MACRo
:FREE
:MACRo?
:NSTates?
<string>
Std
Std
New
Std
Std
Std
Subsystem. Manages instrument
memory.
Subtree.
Event; no query. Deletes the macro with
the name specified by the string
parameter.
Subtree.
Query only. Returns memory usage and
availability corresponding to macro data.
Query only. Returns the number of
available *SAV/*RCL states in the
instrument.
:READ
Std See Measurement Instructions in this
table.
[:SENSe]
:DATA?
:EVENt[1|2]
:HYSTeresis
:RELative
:LEVel
[:ABSolute]
:AUTO
:RELative
:SLOPe
:EVENt2
:FEED
[“ [:]SENSe[1]”]
<numeric_value> [PCT]
<numeric_value> [V]
<Boolean>
<numeric_value> [PCT]
POSitive | NEGative
“[:]INPut[1] | [:]INPut2 ”
Std
Std
New
New
New
New
New
New
New
New
New
New
Subsystem setup commands.
Query only. Returns the current
measurement result data of the SENSe
subsystem (no scale or offset applied).
Subtree. Defines the “trigger event.”
Subtree.
1
Sets the size of the hysteresis window
as a percentage of allowable hysteresis.
2
Sets the sensitivity of the input channel
as a percentage of allowable sensitivity.
Subtree.
Sets the level at the center of the
hysteresis window.
Sets the “auto-trigger” enable.
Sets the percentage of the peak-to-peak
range of the signal at which the
instrument will auto trigger. 0-100%.
Sets which edge of the input signal will
be considered an event.
Subtree.
Sets the common/separate enable.
INPut2 is separate; INPut1 is common.
(Only applies for Time Interval function.)
______________________________
1
Current firmware revision .
2
Prior firmware revisions 3317, 3335, and 3402.