Filter
Top Products
Chapter 2 Command Summary
Front Panel to SCPI Command Maps
Programming Guide 2-37
Table 2-2. HP 53131A/132A SCPI Command Summary (Continued)
Keyword/Syntax Parameter Form Std/
New
Comments
:SYSTem
:COMMunicate
:SERial
Std
Std
Std
Subsystem. Collects the functions that are not
related to instrument performance.
Subtree. Collects together configuration of
control/communication interfaces.
Subtree. Controls the physical configuration of
the RS- 232C port.
:CONTrol Std Subtree.
:DTR IBFull | ON | LIMit Std Sets the usage of the DTR line of the RS-232
port.
:TRANsmit Std Subtree. Affects parameters associated with
transmission.
:BAUD <numeric_value> Std Sets the baud rate.
:PACE XON | NONE Std Sets the software pacing scheme.
:PARity Std Subtree. Controls the parity of the channel.
[:TYPE] EVEN | ODD | NONE Std Sets the parity scheme.
:ERRor? Std Query only. Queries the oldest error in the
Error Queue and removes the error from the
queue (first in, first out).
:KEY <numeric_value> Std Simulates the pressing of a front-panel key.
:LOG? New Query only. Returns a comma-separated list of
integers representing all of the entries in the
Key Queue.
:VERSion? Std Query only. Returns the SCPI version number
with which the Counter complies.
:TRACe
:CATalog?
[:DATA]
[:DATA]
[:DATA]?
[:DATA]?
OFFSET, <numeric_value> [HZ
| S | DEG]
SCALE, <numeric_value>
OFFSET
SCALE
Std
Std
Std
Std
Std
Std
Subsystem.
Query only. Returns list of intrinsic constants.
Sets the offset value.
Sets the scale value.
Queries the offset value.
Queries the scale value.
:TRIGger
:COUNt
:AUTO
<Boolean>
Std
Std
New
Subsystem.
Subtree.
Controls the number of measurements to be
made when :INIT[:IMM] is performed.