Filter
Top Products
Using a Cordless Headset with the Console
15
Guidelines for Cordless Headset Operation
The guidelines below will assist you in answering and receiving calls using the Cordless
Headset:
• When the headset is in the cradle, it is in the IDLE state.
• When the headset is removed from the cradle, it is in the TALK state.
• The headset must be in an IDLE state in order to hear ringing for an incoming call.
• The headset must be in the TALK state in order to hear ringback for an outgoing call.
Answering Calls Using a Cordless Headset
1. Remove the headset from its base and answer the call, or if wearing the headset, press
the Talk button (Silver portion on top).
2. To end the call, press the Talk button, even if the call was terminated by the other
end.
Making Calls Using a Cordless Headset
1. Press the Talk button (Silver portion) on the headset.
2. Place the call from the Console and hear ringback.
3. Press the Talk button to end the call, even if the call was terminated by the other end.
For other details on how to operate these headsets, please refer to the manufacturer’s
documentation.
Powering the Console
The 5540 IP Console is powered by the Power over Ethernet (POE) connection.
Table 1: Cordless Headset Operation
IDLE TALK
Headset BLUE LED is OFF BLUE LED is FLASHING
Base Station BLUE LED is SOLID BLUE LED is FLASHING
Note: If you do not press the Talk button to end the call, the Cordless Headset remains
in the TALK state and you will not be able to hear incoming calls.