Filter
Top Products
Mitel 5540 IP Console - User Guide
26
Extension Paging
Extension Paging allows you to page extension users using their telephone speakers. This
feature is available only for paging telephones that are programmed as key system telephones.
You can use Extension Paging to page a specific extension (Directed Page), multiple extensions
assigned to a group (Group Page), or all extensions (All Set Page).
To page an extension:
1. Press Set Page.
2. Do one of the following:
• To page a specific extension, dial the extension number.
• To page a group of extensions, dial the page group directory number.
3. Make the page.
Call Park
To park an active call:
1. Press the Call Park softkey.
2. Dial the directory number on which to park the call.
3. To inform a user that a parked call is waiting, do one of the following:
• If automatic paging is enabled, announce the call and the park retrieve digits shown
on the display.
• If automatic paging is disabled, press Page for loudspeaker paging or enter the Direct
Page feature access code and the DN of the set. Then, announce the call and the digits
required to retrieve it.
To retrieve a parked call:
1. Do one of the following:
• Dial the Call Park – Retrieve feature access code.
• Press a programmed ParkRetrieve firmkey.
2. Dial the directory number that the call is parked on. When prompted to enter the Parking
Slot, enter the two-digit index number to retrieve a specific call or # to retrieve the longest
parked call