6 - 8 6 - 8
MELSOFT
6 MANAGEMENT OF PROJECTS IN THE PERSONAL COMPUTER
6.7 Opening a Project
The GX Developer project/GX Configurator-QP project/GX Configurator-CC project
selected on GX Explorer can be opened and edited on the created application.
Another file can also be opened by similar operation if relation setting has been made
on Windows
®
Explorer.
1) Choose the project to be edited.
2) Right-click and click the [Run a related application]
menu.
(You may also double-click and press the Enter
key.)
3) The created application starts and the selected project
opens.
For open project editing and other operations, refer to
the manual of the corresponding application.
POINT
• The related application starts independently of GX Explorer.
When you performed project editing, saving or other operation to modify the
project, update it using GX Explorer.
If it is not updated, mismatch will occur between the actual data and the display of
GX Explorer.
• In the project of GX Configurator-CC, only the master parameter setting
(extension ".CMP") can start a related application.
Since the remote parameter setting (".CRP") cannot start a related application,
boot GX Configurator-CC from the start menu or like and open the project.
