Filter
Top Products
7 - 11 7 - 11
MELSOFT
7 MANAGEMENT OF DATA IN THE PLC CPU
(2) Example of menu-driven operation for read from PLC
1) In the PLC side window, choose the device memory
file to be read.
2) Click the [Edit] - [Copy] menu.
(You may also right-click, choose the [Copy] menu,
press the
button, and click the Ctrl + C keys.)
3) Choose the read destination project in the PC side
window. (If the project is not selected, a new project
name "GX Developer project" is created.
4) Click the [Edit] - [Paste] menu.
(You may also right-click, choose the [Paste] menu,
press the
button, and click the Ctrl + V keys.)
5) Click the Yes button in the read from PLC
confirmation dialog box.
6) Set "Device data name" in the Device memory read
dialog box.
For the file registers of the ACPU or QCPU (A mode),
set the file register type ("File register" or "Extension
file register") and further "Block No." for the extension
file registers.