Filter
Top Products
7 - 14 7 - 14
MELSOFT
7 MANAGEMENT OF DATA IN THE PLC CPU
POINT
• If there are more than one device initial value file in the same memory of the PLC
CPU, the target of read cannot be identified, and therefore read from PLC with
the memory or data type specified cannot be performed.
Specify and read the file.
• If you do not choose a paste (read from PLC) destination project but select a
folder and paste (drop) the source project, a new project is created and only the
specified device initial value file is read. (The parameters are set to the initial
values.)
Its project name is "GX Developer project".
If the project of the same name exists in the folder, the project name will be "GX
Developer project
" ( indicates a number in numerical order, starting from 1).