Filter
Top Products
7 - 21 7 - 21
MELSOFT
7 MANAGEMENT OF DATA IN THE PLC CPU
7.3 Deleting Data in the PLC CPU
Delete the program, parameters or other data of the QCPU (Q mode) or QnACPU.
This operation cannot be performed for the ACPU or QCPU (A mode).
Deleting PLC data during RUN displays the remote STOP confirmation dialog box.
Click the Yes button to delete the PLC data after remote STOP.
After completion of PLC data deletion, perform remote operation (refer to Section
7.4.2) or move the RUN/STOP switch of the PLC CPU to RUN.
Click No
when not executing remote STOP and PLC data deletion.
(1) Operation example
1) Choose the PLC CPU or memory name whose PLC
data will be deleted, right-click, and click the [Delete
PLC data] menu.
2) In the Delete PLC data dialog box, choose the target
memory and the file to be deleted, and click the
Execute
button.