Polar RS100 Refrigerator User Manual


  Open as PDF
of 59
 
28
ENG
5.1 TIMER SETTINGS
Runningintervalsisanimportantpartofdevelopingyourrunningperformance.Yourrunningcomputerisequippedwithtwo
alternatingtimers,allowingyoutosetonerepeatingortwodifferentalternatingtimeintervals.
Tip:Youcansettimer1forasprint/runof4minutesandtimer2fora2-minuterecovery.
 Onceset,thersttimerwillbeginwhenthestopwatchisstartedinRecordingmode.WhenTimer1isnishedthealarmsoundsonceand
 Timer2automaticallystarts.WhenTimer2isnishedthealarmwillsoundtwiceandTimer1automaticallybeginsagain,andsoon.
1.InTimemode,press .Settingsisdisplayed.
2.PresstheRedbutton.Timer SETisdisplayed.
3.ContinuebypressingtheRedbuttonandfollowthestepsbelow:
The display reads: Press or to set Press the Red button to accept
4. Timer 1
On / OFF
5. Minutes
6. Seconds
/
•turntheTimer1onoroff
/
•adjusttheminutes(0-99minutes)
/
•adjusttheseconds(0-59)
Redbutton
Redbutton
Redbutton
• TosetTimer2,returntostep4.
• ToreturntoTimemode,pressandholdtheStopbutton.
 previous next