Filter
Top Products
GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. E
7-2
SECTION 7
WPT PAGES
Entering a waypoint identifier:
1) Select the desired WPT page and press the
small right knob to activate the cursor.
2) Turn the small
right knob to select the first
character of the waypoint’s identifier.
3) Turn the large
right knob to select the next
character field.
4) Turn the small right knob to select the desired
character (Figure 8-2).
Figure 7-2 Waypoint Identifier Selected
5) Repeat steps 3 and 4 until the identifier is
selected, then press the ENT Key.
6) To remove the flashing cursor, press the small
right knob.
Entering a waypoint facility name or city
location:
1) Select the Airport Location Page, NDB Page
or VOR Page from the WPT Page Group (as
described on the preceding page).
2) Press the small right knob to activate the
cursor.
3) Turn the large
right knob to select the facility
name or location (city) field.
4) Turn the small right knob to select the desired
character (Figure 7-3).
Figure 7-3 Facility Location Field Selected
5) Turn the large right knob to select the next
character field.
6) Repeat steps 4 and 5 until the facility name or
location is selected, then press the
ENT Key .
7) To remove the flashing cursor, press the small
right knob.