Filter
Top Products
GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. E
7-6
SECTION 7
WPT PAGES
7.3 AIRPORT RUNWAY PAGE
The Airport Runway Page (Figure 7-9) displays runway
designations, length, surface type, and lighting for the
selected airport. A map image of the runway layout and
surrounding area is also displayed on the Airport Runway
Page. The map image range appears in the lower left
corner and is adjustable using the RNG Key. For airports
with multiple runways, information for each runway is
available.
To view runway information for a particular airport on
the Airport Runway Page, enter the airport’s identifier per
Section 7.1.
Figure 7-9 Airport Runway Page
Map Image
Airport Identifier,
Symbol, and Type
Runway
Designations
Runway
Length and
Width
Runway
Surface
Runway
Lighting
Number of Pages in
Current Page Group
Position of Current Page
within Current Page Group
Current
Page Group
Displaying information for each additional
runway:
1) Press the small right knob to activate the
cursor.
2) Turn the large
right knob to place the cursor
on the runway designation field.
3) Turn the small right knob to display a window
listing all runways for the selected airport
(Figure 7-10).
Figure 7-10 Runway Window
4) Continue turning the small right knob to select
the desired runway.
5) Press the
ENT Key to display information for
the selected runway on the Airport Runway
Page (Figure 7-11).
Figure 7-11 Airport Runway Page
6) To remove the flashing cursor, press the small
right knob.