Filter
Top Products
GNS 530(A) Pilot’s Guide and Reference
190-00181-00 Rev. E
1-14
SECTION 1
INTRODUCTION
A frequency listed on the NAV/COM Page can be
quickly transferred to the standby field of the COM
Window or the VLOC Window. This time-saving process
prevents having to ‘re-key’ a frequency already displayed
elsewhere on the screen.
Selecting a communication or navigation
frequency:
1) Press the small right knob to activate the
cursor in the GPS Window.
2) Turn the large
right knob to select the desired
frequency from the list.
3) Press the ENT Key to transfer the selected
frequency to the standby field in the COM or
VLOC Window. COM frequencies automatically
go to the standby field of the COM Window and
navigation frequencies automatically go to the
standby field of the VLOC Window, regardless
of which window is currently highlighted by
the cursor.
4) To activate the selected frequency, press the
COM or VLOC Flip-flop Key.
Displaying frequencies for a different
airport along the flight plan.
1) Press the small right knob to highlight the
airport identifier field.
2) Turn the small
right knob to display the list of
airports within the flight plan (Figure 1-22).
Figure 1-22 Airport Window
3) Continue turning the small right knob to select
the desired airport and press the ENT Key.