Filter
Top Products
OPERATION AND SERVICE PROCEDURES
Electronic Range Control - ERC (Models w/One Piece Control)
47 RC231002 Rev. 3
The display will increase in 5° increments starting
from 170°F. The ERC will automatically initiate the
timed cook function approximately two (2) seconds
after the last temperature entry and "ON" will appear
on the display. The oven temperature rise will be
displayed during oven preheat in 5° increments start-
ing at 100° F. When the timed cook function is
completed the ERC will automatically turn the oven
off and an alarm will sound three (3) times. The
display will then show the time of day.
To change the cook time or baking temperature while
the oven is operating in the timed cook function,
simply press the appropriate button for the function to
be changed (COOK TIME or BAKE TEMP.) and then
rotate the "TIME/TEMP. SET" knob to set the new
time or temperature.
To cancel the timed cook function before it is com-
pleted, simply press the "SET/CANCEL" button or
rotate the "TIME/TEMP. SET" knob counterclock-
wise until cooking time display shows ":00", or until
the temperature display shows the three (3) center
horizontal segments and the degree (°) symbol. The
ERC will then automatically cancel the timed cook
function.
To Use the Stop Time Function:
1. Press the "STOP TIME" button. "STOP TIME" will
appear in the display.
2. Rotate the "TIME/TEMP. SET" knob clockwise to set
the desired stop time or time the oven is to shut off up
to eleven (11) hours and fifty-nine (59) minutes after
the time of day depending on the current time of day
programmed into the ERC. The display will increase
in five (5) minute increments.
3. Press the "BAKE TEMP." button. "BAKE" will appear
along with the three (3) center horizontal segments
and the degree (°) symbol in the temperature display.
If the "BAKE TEMP." button is not depressed within
approximately five (5) seconds after setting the stop
time, an alarm will sound as a reminder to set the bake
temperature.
4. Rotate the "TIME/TEMP. SET" knob to set the de-
sired baking temperature from 170°F. to 550°F. The
display will increase in 5° increments starting from
170°F. The ERC will automatically initiate the baking
function approximately two (2) seconds after the last
temperature entry and "ON" will appear in the display.
The oven will operate until the stop time is reached.
At that time the ERC automatically turns the oven off
and an alarm will sound three (3) times. The display
will then show the time of day.
To change the stop time or baking temperature while
the oven is operating in the stop time function, simply
press the appropriate button of the function to be
changed (STOP TIME or BAKE TEMP.) and then
rotate the "TIME/TEMP. SET" knob to set the new
stop time or temperature. To cancel the stop time
function before it is completed, simply press the
"SET/CANCEL" button.
To Use Stop Time for Delayed Baking Function:
1. Press the "STOP TIME" button. "STOP TIME" and
the current time of day will be displayed.
2. Rotate the "TIME/TEMP. SET" knob clockwise to the
time the oven is to turn off. The display will increase
in five (5) minute increments.
3. Press the "COOK TIME" button. "OVEN", "TIME",
and the "CALCULATED COOK TIME" will be dis-
played.
4. Rotate the "TIME/TEMP. SET" knob to enter the
amount of time to bake. The display will decrease in
five (5) or ten (10) minute decrements depending on
the programmed stop time and the time of day.
"DELAY" will appear in the display.
5. Press the "BAKE TEMP." button. "BAKE" will appear
along with the three (3) center horizontal segments
and the degree (°) symbol in the temperature display.
If the "BAKE TEMP." button is not pressed within
approximately five (5) seconds after setting the cook
time an alarm will sound as a reminder to set the bake
temperature.
6. Rotate the "TIME/TEMP. SET" knob to desired bak-
ing temperature from 170° to 550°F. The ERC will
automatically calculate the start time. When the start
time is reached, "DELAY" will turn off and "ON" time
is reached. The ERC will then automatically turn the
oven off, an alarm will sound three (3) times and ":00"
will be displayed.
7. Press the "SET/CANCEL" button to cancel the timed
function.
To Set Broil Function:
1. Press the "BROIL" button. "BROIL" will appear along
with three (3) center horizontal segments in the
temperature display.