Filter
Top Products
HotCup Operators’ Guide Programming Procedures
November, 2007 39 6740001
ENTER A NEW SUPERVISOR CODE
a. Follow the steps in (See “Gain Access to the Supervisor Mode” on page 38).
b. Press , then until the display shows
SUPER XXXX. The X's represent the
current supervisor code. Use the number keys to enter a new code.
IMPORTANT!
If you enter a new code, be sure to keep a written record of it.
There is no other way to access the SUPERVISOR mode.
c. CONTINUE.
ENTER A FREEVEND CODE
a. Follow the steps in (See “Gain Access to the Supervisor Mode” on page 38).
b. Press until the display shows
FREE XXXX.
The X's represent the current freevend code. Use the number keys to enter a new code. If
the code is anything other than "
0000", it must be entered after the key lock is turned in order
to enable free vends.
c. CONTINUE
LOCK OR UNLOCK MODE OR PAYOUT KEYS
a. Follow the steps in (See “Gain Access to the Supervisor Mode” on page 38).
b. Press until the display shows either
X. LOCKED or X. UNLOCKED. "X" refers to
the number or character shown on the mode or payout key in question (1 through 9, # and *).
To see if a key is locked or unlocked, press that key.
c. Press to change between locked and unlocked. When anyone other than the supervisor
tries to enter a locked mode, the display shows
LOCKED.
NOTE
The following mode keys cannot be locked out:
d. CONTINUE.