Filter
Top Products
Time Setup HotCup Operators’ Guide
6740001 70 November, 2007
Time Setup
SET THE TIME
a.Press . The display shows
TIME H.MM. "H.MM" is the time of day currently
set in the machine.
b. To change the time, just enter the time with the number keys using a 24-hour format (1300 =
1:00 pm).
NOTE
The new time will be displayed, but not updated in the system
until you press an arrow key or .
c. CONTINUE.
SET THE DAY OF THE WEEK
a.Press , then press until the display shows
@ SMTWTFS. The currently
set day of the week will be flashing. If it is correct, CONTINUE.
b. To change the day, press until the correct day is flashing.
c. CONTINUE.
SET THE DATE AND YEAR
a. Press , and press until the display shows
MM/DD YY.
"
MM/DD YY" is the month, date, and year currently set in the machine. The slash (/)
means that the U.S. date format is being used.
b. If desired, enter a new month, date, and year with the number keys.
To change to the European date format (
DD-MM YY), press . The display is now
shown with the date before the month, and the slash (/) is replaced by a dash (-) to avoid
confusion.
c. CONTINUE.