Filter
Top Products
HotCup Operators’ Guide Messages
November, 2007 73 6740001
g. Press . The display shows 1. - - - - - - -. The dashes represent the selections affected
by this time interval. Press the appropriate letter key to turn the selections on or off.
NOTE
Selections not vended by your machine will not be displayed.
Press A, B, F, and H. The display shows
1. A B - - - F - H.
h. Press . The display shows either:
1. MESG OFF There is no custom message selected.
or
1. MESG X. This means that custom message X (1 through 8) will be displayed during this
time interval. Press the number key of the message you want displayed. Pressing 0 turns
the message OFF for this time interval.
(You can also press to scroll through the message list.)
NOTE
YOU CAN SET UP THE CUSTOM MESSAGE BY FOLLOWING THE
CUSTOM MESSAGE EDITING PROCEDURE.
i. CONTINUE.
Messages
SELECT A STAND-BY MESSAGE
a. Press , then press until the display shows
STANDBY MX. "X" represents the
current message number selected for the standby message. Two dashes mean that the
factory-set message is selected.
b. To select a message, just press the corresponding number (1 through 8). To display the
factory-set message, press 0.
OR
Press to scroll through all eight messages and the factory-set message.
c. CONTINUE.
The message that is displayed during normal vending
periods when there are no out-of-service faults
STAND BY