Filter
Top Products
HotCup Operators’ Guide View Machine Info
November, 2007 89 6740001
DOWNLOAD DATA TO A PDCD
a. Connect your portable data collection device (PDCD) in accordance with its operating
instructions.
b. Press . Data is downloaded into your PDCD.
NOTE
Depending upon the setting selected (See “Set Printer or Dex Options”
on page 40), data may be cleared after the download is complete.
c. Continue.
CHANGE MACHINE ID NUMBER
a. Follow the steps in (See “Gain Access to the Supervisor Mode” on page 38).
b. Press , then until the display shows
I.D. XXXXXX . The X's represent the 6-
digit machine ID number.
c. Using the number keys, enter a new ID number.
d. CONTINUE.
VIEW THE WATER TANK TEMPERATURE
a. Press . The display shows
TEMP XX F. This is the current water tank temperature
(in degrees F or C, depending upon your choices).
b. CONTINUE.
VIEW THE CURRENT SOFTWARE VERSION NUMBER
a. Press , then press until the display shows
VER XXXX. This is the current
software version number.
b. CONTINUE.
VIEW THE SELECTION MACHINE TYPE
a. Press then until the display shows
MACH.TYPE (X). This is machine type,
(See “Set the Machine Type Configuration Code” on page 55).
b. CONTINUE.