Filter
Top Products
PosiVend HotCup Operators’ Guide
6740001 64 November, 2007
RINSE THE BREWER
WARNING
Very hot water will be dispensed in this test. Coming into contact
with hot water will HURT!
a. Press , then press until the display shows BREW RINSE.
b. Press to rinse the brewer. The brewer cycles, and RINSING is displayed.
c. CONTINUE.
FILL THE TANK
a. Press , then press until the display shows TANK.FILL.
b. Press . This clears any tank error and starts filling the tank, if necessary.
NOTE
If it is taking a long time to fill the tank AND THERE ARE NO
LEAKS, you may see TANK ERR in the diagnostic list again.
c. Just press again after making sure there are no other problems, such as a restriction
in the water inlet line or a clogged water filter.
d. CONTINUE.
PosiVend
TURN POSIVEND™ ON OR OFF
a. Press then until the display shows one of the following:
sure.v off: None of the PosiVend™ functions are available. Use this if the PosiVend™
system is not installed, or there is some reason you do not want to use it (for example in a
high cup theft situation).
sure.v on. The PosiVend™ system is operative. All of the PosiVend™ functions are
available.
b. Press to switch between the two choices.
c. Continue.