Filter
Top Products
HotCup Operators’ Guide Hot Drink Setup
November, 2007 53 6740001
SET THE RATIO OF CHOCOLATE IN CAPPUCCINO
a. Press , then press until the display shows either:
RATIO XX "XX" is the percentage of chocolate contained in a cappuccino drink or RATIO
OFF
No ratio is selected.
b. Press to switch between these two displays. To change the value of
RATIO XX,
enter the numbers directly. This is a quick way to set up your cappuccino drinks. You can set
a ratio close to your taste, turn ratio OFF, then alter the product throw.
NOTE
Leaving this step with
RATIO OFF displayed does not alter any previous settings for
E and I selections. Leaving this step with a ratio set will alter those settings. The ratio
automatically selects the times for water and dry product throw. The E and I
selections no longer appear in the displays for those steps. If you desire greater
control over your cappuccino drinks, leave ratio OFF.
c. CONTINUE.
SET THE BREWER RINSE TIME INTERVAL
a. Press , then press until the display shows
SAN.TIM X.X. "X.X" represents
the time of day (in hours and tenths of hours) the machine rinses the brewer. For example,
SAN.TIM 4.5 means that brewer rinse takes place at 4:30 am. Use the number keys to
enter a new time, if desired. Range: 0.0 - 23.9 in .1 hour (6 minutes) increments.
b. Press . The display shows
SAN.HRS X.X. "X.X" represents how soon the machine
rinses the brewer after the last brewed selection. For example,
SAN.HRS 2.5 means
brewer rinse takes place 2.5 hours after the last vend. Use the number keys to enter a new
time, if desired. Range: 2.0 - 12.5 hours, in .1 hour (6 minutes) increments.
c. CONTINUE.