Filter
Top Products
28
4.2.3 Integrated Models
There are 5 user options:
To enter the option mode, check that there is no wash underway, press the power button then open the drawer.
Press the Eco button rst with one nger, then the Keylock button with another nger, hold both until one long
beep sounds, then release the buttons.
You are now in the rinse aid option of the preference options menu., to scroll to the next option push the
button.
To change the settings in the option use the Keylock button.
Once the selected option and settings are selected, to save push the Power button.
To exit the option at any time push the Power Button.
After the wash
Dos and don’ts of loading
The dishwasher will beep six times to indicate the end of the wash program.
You may notice the following noises at the end of the wash. These are all part of normal operation:
In double models, both drawers may be draining simultaneously.
The drying fan may continue to run after a wash program has finished for a set time. The fan assists with drying and uses
negligible amounts of energy.
For best drying results, we recommend unloading the dishes once they have cooled.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
Overcrowding reduces wash
performance.
Protruding items will stop the
internal lid of the drawer from
sealing properly, which could result
in a service call.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
If plates and cutlery are nesting,
they are less likely to be cleaned
well.
Ensure that water reaches all items on
the adjustable racks.
Dishware is blocking water from
reaching items on the adjustable
racks.
Preference options
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
Option Rinse aid Water softener
Open drawer auto
power-on
Beeps at end of
wash
Closed drawer autolock
What does
it do?
Regulates the amount
of rinse aid dispensed.
Reduce this setting if
there is excess foam
after a wash. Increase
this setting if dishes are
wet or streaky after a
wash.
Refer to the
‘Water softener’
section of the
‘User guide’ for
details.
Your DishDrawer is
factory-set to
automatically power
on for 30 seconds
whenever you open it.
You can turn this
setting off.
Your DishDrawer is
factory-set to beep
six times at the end
of a wash. You can
turn this setting off.
When this setting is on,
the drawer will
automatically lock 30
seconds after it’s closed.
It can then be unlocked
by pressing
(unless
Keylock or Childlock is also
activated). Useful in boats
or motor homes.
How to change the setting of an option
1
CHECK & OPEN
Check that there is no wash underway, press , then open the drawer.
2
ENTER MENU & SCROLL TO OPTION
To enter the menu: press the
selector on top first with one finger, then the button on the front with another finger, hold both
until one long beep sounds, then release.
You are now in the Rinse aid option of the preference options menu.
If you want to change the Rinse aid setting, go to step 3 now.
If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
. To know which option you’re in, watch the lights above and
(see table below).
When you have scrolled to the end of the sequence, it will start again with Rinse aid (after the lower tone).
3
CHANGE SETTING
Press to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press
3 times.
4
SAVE SETTING & QUIT MENU
Press . This will save the new setting and quit the preference options menu.
Option Rinse aid Water softener
Open drawer auto
power-on
Beeps at end of wash
Closed drawer
autolock
Which option
am I in?
Possible settings
1 to 5 0 to 5 On or Off On or Off On or Off
Example
red unlit green unlit orange red green red red red
4 indicators lit = setting is 4
On
Off
For more info
For detailed information on the
features of your dishwasher
For warranty information
If you…
have any questions or comments
need a Fisher & Paykel authorized
technician to service your product
need replacement parts or accessories
want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet or contact us
GB
toll-free, 24/7
0845 066 2200 www.fisherpaykel.co.uk
IE
toll-free, 24/7
1800 625 174 www.fisherpaykel.ie
590195A 10.11
4.2.4 Integrated with Wireless Remote Control
There are 3 user options avialable:
To enter the option mode, make sure no wash is underway and open the drawer.
Press the button rst with one nger, then the button with another nger, hold both until one long beep
sounds, then release the buttons.
You are now in the rinse aid option of the preference options menu.
To change the rinse aid setting press the button, which will increase or decrease the amount of LED’s on the
secondary control panel, there are 5 dispensing levels (1 LED = approx 0.5mls (1/10 teaspoon) of rinse aid, 5
LED’s = approx. 2.5mls (½ teaspoon) of rinse aid.
To scroll to the next user option press the button
You are now in the water softener water hardness setting of the preference options menu.
To change the settings press button, which will increase or decrease the amount of LED’s showing on the
secondary panel.
There are 5 settings available, ensure you set the water softener up depending on the hardness of the incoming
water supply.
DishDrawer Settings Grains per Gallon (gpg) Parts per Million (ppm)
No LED 0-6 0-100
1 LED 6-14 100-250
2 LED 14-20 250-350
3 LED 20-26 350-450
4 LED 26-32 450-550
5 LED 32-36 550-625
GB, IE, EU
Secondary
Panel