Filter
Top Products
73
This procedure details how to fit and pair the wireless interface (badge and receiver) on an integrated
Phase 7 product.
The wireless badge (or remote) interface for integrated products consists of 2 specific modules, a
remote control and a receiver.
NOTE: For each integrated product with the wireless badge, there is only one remote and one
receiver, regardless of whether it is a single or double product.
Receiver Replacement Procedure:
First fit the receiver to the product. The receiver sits in the same location as the badge isolator on a
designer product and plugs into the ‘LCD/BADGE’ input. On a double product, the receiver is to be
fitted to the top tub only and nothing is to be connected to the ‘LCD/BADGE’ input of the bottom tub.
Receiver fitted to a single product
Receiver fitted to a double product
To Pair Remote to Receiver
Before the product will function, the remote must be paired to the receiver. This ensures that the
remote only operates the correct DishDrawer.
i) Press one of the buttons to make sure that the remote is powered, the ‘Transmit indicator’
should flash.
ii) Ensure there is power to the product. If the receiver is connected correctly, the product
should power up and play the startup sound. Place the remote on the wash programme
selector as shown.
Pairing Procedure
D
D