Filter
Top Products
62
9.11 Filter Plate
1. Remove the cutlery basket and rack from the tub.
2. Remove the drain lter assembly.
3. Rotate the lter plate locknut anti-clockwise to release
the lter plate from the motor rotor assembly.
4. Lift the lter plate clear.
5. Ret in reverse manner, ensure the 3 legs are locked
correctly to the motor rotor and the o-ring on top of
the motor rotor is in place.
Motor Rotor
O-Ring
Locknut
9.12 Motor Rotor
1. Remove the lter plate (refer section 9.11)
2. Slightly lift the motor rotor lock ring at the pointer
to disengage the lock tab under the chimney, then
rotate the motor rotor anti-clockwise to release it
from the motor housing and lift out.
3. The rotor assembly is not serviceable and if damaged
should be replaced.
4. Ret in reverse manner, taking care to align the legs
on the rotor with the slots in the motor housing. The
rotor can only be placed in one position. The short leg
goes into the middle slot on the housing.
Pointer
Rotate
Direction
Lock Tab
D
D