Filter
Top Products
18
ANTI-TIP BLOCKING KIT
To prevent the unit from tipping forward and to
provide a stable installation, the unit must be
secured in place with an anti-tip blocking kit. If
there is a solid soffit above the unit with clear-
ance between the unit and the soffit of 25 mm
or less, you won‘t need to block the unit. But for
installations with clearances of more than 25
mm, you must block the unit with the anti-tip
blocking kit (wood block and hardware) provided
with each Sub-Zero Built-In model. Refer to the
Built-In Installation Guide packed with the appli-
ance, which provides step-by-step procedures
for making sure the unit is installed properly.
ADDING PANELS
In your plan for panels, be sure you are working
with the Sub-Zero panel design family called for
in your design. If you have chosen the stainless
steel design, the unit will be shipped complete
with wrapped stainless steel doors and handle
hardware. You will not have to install door
panels.
Specifications on the following pages provide
panel dimensions and installation considerations
for overlay door panels.
Side panels can be used with the overlay and
stainless steel design applications. Refer to
specifications on page 20.
ACCESSORIES
Optional accessories
are available
through your
Sub-Zero dealer.