Filter
Top Products
44
PANEL
SIDE MOLDING AND
INSTALLATION HARDWARE
PROVIDED BY SUB-ZERO
LINE OF INTERFERENCE*
AT MAXIMUM DOOR OPENING
MOUNTING BRACKET SCREW
FLUSH
FURNITURE
FINISH
LINE OF INTERFERENCE*
TO BACK
OF UNIT
610 mm
SUB-ZERO DOOR
657 mm
DOOR WIDTH FOR 686 mm MODELS
886 mm
DOOR WIDTH FOR 914 mm MODELS
REVEAL
3 mm min.
19 mm
IMPORTANT NOTE: The depth of each
Integrated model is 610 mm from the
front of the unit to its back. Your
design may necessitate moving the
unit back or cabinets forward to
achieve a flush fit.
FRAMED CABINETRY
DOOR CLOSED
Full-scale (top view)
610 mm
LINE OF INTERFERENCE*
SUB-ZERO
DOOR
TO BACK
OF UNIT
105˚ MAXIMUM
DOOR OPENING
1/4 scale (top view)
*If the panel is thicker than 19 mm, it is
recommended that you utilize the built-in
90˚ door stop to prevent damage to the
panel and face frame.