Filter
Top Products
Page 14
Using The Cooktop
Sealed Burners
The cooktop features four or six gas surface burners; each rated at 15,000 BTU/HR
(13,000 BTU/ HR using Propane). The burners are sealed to the stainless steel top
frame to prevent liquid spills from accumulating below the top surface, making it
easier to clean. On all models, the two left burners have the exclusive ExtraLow fea-
ture, the remaining burners are standard. Each burner has its own control knob.
Control Knobs
The control knobs for two sealed gas burners, one in front and one in the rear, are
located directly in front of and below the pair of burners on the control panel.
The two words above each control knob identifies the burner position. For example,
LEFT FRONT, RIGHT FRONT, etc.
Operation of the
Burners
• Press in on the knob and turn it counter-clockwise to the setting.
• The igniter for the selected sealed burner clicks and sparks.
• After flame ignition, the igniter stops clicking.
• Rotate the knob to any flame setting between HI and SIM.
• The Blue Burner Signal Light, between the burners, will light when adjacent
burners are lit. They will remain on until the burner is turned off.
Figure 2: Sealed Star
®
Brass Burner Base
Figure 3: Standard Burner Control Knob
Bezel
Knob
Setting Indicator