Filter
Top Products
Reset Menu
Chapter 1: Configuring the Printer
❖
1-111
CRU Resets
Reset the selected CRU.
The available values are:
COLOR DEV
FUSER MOD
BLACK DEV
PRINT DRUM
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Reset Menu
2. Press
Item Up
or
Item Down
until you see:
Reset Menu
CRU Resets
3. Press
Value Up
or
Value Down
until you see:
CRU Resets
Yes
4. Press
Enter
. You will see:
CRU Resets
Please Wait
5.When the action is complete,
you will see:
Ready
Restart Printer
Re-boot the printer as if the power
was cycled, but bypassing power on
diagnostics.
The available values are:
Yes
No*
This action does not remove the Reset
Menu. To do so, power off/on the
printer.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Job Menu
2. Press
Item Up
or
Item Down
until you see:
Job Menu
Restart Printer
3. Press
Value Up
or
Value Down
until you see:
Restart Printer
Yes
4. Press
Enter
. You will see:
[Startup Messages]
5.When the action is complete,
you will see:
Ready
Delete All Jobs
Delete all secure or proof jobs from
the disk.
The available values are:
Yes
No*
This function is ignored if the disk is
locked (write protected) via a PJL or
SNMP command.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Reset Menu
2. Press
Item Up
or
Item Down
until you see:
Reset Menu
Delete All Jobs
3. Press
Value Up
or
Value Down
until you see:
Delete All Jobs
Yes
4. Press
Enter
. You will see:
Delete All Jobs
Please Wait
5.When the action is complete,
you will see:
Ready
Table 1.21 Reset Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table1.21 Page2 of 3