Filter
Top Products
Cleaning the Printer
Chapter 4: Maintaining the Printer
❖
4-7
7
While holding the paper switch down, wipe all the rollers
with a clean cloth.
8
Clean the areas between the developer rollers. It is not
necessary to completely remove the toner from the
developer rollers.
9
Hold the Print Drum with both hands by the side handles.
10
Replace the Print Drum by sliding it down and into the
printer.
11
Secure both latches of the Print Drum.
12
Close the Front Cover.
If you detect the presence of any oil on any of these rollers or
the Transfer Drum, immediately remove the Fuser from the
printer and call your service provider or Xerox representative.