3D Innovations NC60 Refrigerator User Manual


 
Cleaning the Printer
Chapter 4: Maintaining the Printer
4-5
Cleaning the
Grounding Roller and
Feed Rollers
The interior rollers, located under the Front Cover, should
be cleaned only if roller marks appear on prints.
Figure 4.1 Location of Interior Rollers
Grounding Roller
Registration/Precurler Roller
Paper Sensor Switch
Paper Feed Rollers
Developer Rollers (4)
(underneath the Print Drum)
There is a small paper sensor switch in the bottom of the
printer that is easily broken. Use extreme caution in this
area to avoid damaging the printer. This switch can
only be repaired by a service technician.
When cleaning, do not use water or a cloth dampened
with water. Use a clean, dry, lint free cloth.
0300242A-ACX
1
2
3
4
5