Filter
Top Products
Tray Menu
1-28
❖
DocuPrint NC60 System Administrator Guide
Tray Sequence
Define the order in which trays
are used when more than one
tray meets the size and type
requirements.
The available values are:
1-2
2-1
Off*
Tray switching is only available
when the optional Tray 2 is
installed.
The first tray of a sequence is
used until it runs out of paper, at
which time the next tray in the
sequence is used (if it has the
correct paper size and type).
1. Press
Menu Up
or
Menu Down
until you see:
Menus
Tray Menu
2. Press
Item Up
or
Item Down
until
you see:
Tray Menu
Tray Sequence
3. Press
Value Up
or
Value Down
until
you see:
Tray Sequence =
New Value
4. Press
Enter
. You will see:
Tray Menu
Tray Sequence
5. Press
Online
. You will see:
Ready
Table 1.8 Tray Menu functions
(continued)
Menu Item and Function Keystrokes Display Reads
Table 1.8 Page 3 of 3