3D Innovations NC60 Refrigerator User Manual


 
Control Panel Features
Chapter 1: Configuring the Printer
1-9
Value Down (-)
If in the menu system, and an item is displayed, pressing this key causes the Control
Panel to scroll through the values for the current item in order top to bottom unless
a higher priority message is displayed (e.g. operator intervention required, etc.),
which preempts menu navigation. Scrolling wraps, such that if the displayed value
is the bottom value, pressing this key scrolls to the top value. If no value for the
current item is displayed (Item key was pressed but Value key not yet pressed for
this item), pressing this key displays the default value for the current item. When
setting a numeric value, this key decreases the value by the step amount. It is
subject to auto-repeat if held down by more than 1 second, after which the value
scrolls repeatedly until the key is released. The decrement for each step may be
greater than that for a single key press.
If not in the menu system, and a paper mismatch condition does not exist, this key
is ignored.
If a Paper Mismatch condition exists, pressing this key scrolls through the alternate
media that may be used instead of the requested media.
If in the Password menu, and the display indicates “Enter Password”, pressing this
key causes a password digit “7” to be entered.
Table 1.2 Control Panel keys and their functions
(continued)
Key Description
Table 1.2 Page 5 of 5