Filter
Top Products
Token Ring Menu
Chapter 1: Configuring the Printer
❖
1-81
LAA
Set the six byte Locally Administered
Address.
The valid values are:
xxxx xxxx xxxx
(where xxxx xxxx xxxx can equal any
value within the valid range of 4000 0000
0000 and 7FFF FFFF FFFF)
For this item (after Step 3),
Item Up
moves the cursor to the right through
the displayed LAA and
Item Down
moves the cursor to the left. This
allows you to change characters
within the string rather than having to
reenter the entire string.
With the cursor displayed under a
character,
Value Up
increments the
value of that character and
Value
Down
decrements the value.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
Token Ring Menu
2. Press
Item Up
or
Item Down
until you see:
Token Ring Menu
LAA
3. Press
Value Up
or
Value Down
.
You will see:
LAA =
xxxx xxxx xxxx
4. Press
Value Up
or
Value Down
to change the value of the
character above the cursor. The
value is incremented or
decremented by 1 each time
the key is pressed. Holding
down
Value Up
or
Value
Down
causes continuous
scrolling through the values.
LAA =
xxxx xxxx xxxx
5. To change other characters in
the LAA, press
Item Up
or
Item
Down
to scroll right or left
respectively through the
character string, then press
Value Up
or
Value Down
to
change the value of the
character above the cursor (as
in Step 4).
LAA =
xxxx xxxx xxxx
6. When you have completed
setting the LAA, press
Enter
.
You will see:
Token Ring Menu
LAA
7. Press
Online
. You will see:
Ready
Table 1.16 Token Ring Menu functions
(continued)
Menu Item and Function Keystrokes Display
Table 1.16 Page 11 of 12